CO2 Capture and Storage CCS

  

 

Everything you wanted to know about
CO2 Capture and Storage (CCS), but had no one to ask .

 

 

1. What is CCS?

CO2 Capture and Storage (CCS) describes a technological process by which the carbon dioxide (CO2) generated by large stationary sources - such as coal- fired power plants, steel plants and oil refineries - is prevented from entering the atmosphere.

That’s because it enables at least 90% of these CO2 emissions to be captured, then stored in geological formations – safely and permanently – deep underground (at least 800m). In fact, it uses the same natural trapping mechanisms which have already kept huge volumes of oil, gas and CO2 underground for millions of years.

Currently, all of the CO2 produced by these large stationary sources is released into the atmosphere – directly contributing to global warming.

2. Why is it a critical technology for combating climate change?

CCS is the single biggest lever to combat climate change (compared to, for example, energy efficiency which requires many different actions). In fact, CCS has the potential to address almost half of the world’s current CO2 emissions.

Experts estimate that by 2050, CCS could reduce annual CO2 emissions by 0.6 to 1.7 billion tonnes in the EU and by 9 to 16 billion tonnes worldwide. The upper end of this range would require its application to all fossil fuel power plants and to almost all other large industrial emitters – with the large volumes of hydrogen produced used for transport fuel.

3. What other benefits will CCS provide?

In addition to its potential to reduce CO2 emissions on a massive scale, CCS will also provide greater energy security – by making the burning of Europe’s abundant coal reserves more environmentally acceptable and reducing its dependency on imported natural gas. CCS could also facilitate the transition to a hydrogen economy through the production of large volumes of clean hydrogen which that could be used for electricity or transport fuel.

EU demonstration efforts on CCS will not only demonstrate the EU’s commitment to delivering on its own CO2 reduction targets, but spur other countries to do the same – especially large CO2 emitters, such as China, India and the US. As a global solution to combating climate change, CCS could therefore also give a major boost to the European economy – promoting technology leadership, European competitiveness and creating jobs.

4. How does CCS work?

CCS consists of three stages:
i. Capture: CO2 is captured and compressed at the emissions site.
ii. Transport: The CO2 is then transported to a storage location.
iii. Storage: The CO2 is permanently stored in geological formations, deep underground.

Each of these stages – capture, transport and storage – can be accomplished in different ways.

i. Capture processes:

    Post-combustion: CO2 is removed from the exhaust gas through absorption by selective solvents.
    Pre-combustion: The fuel is pre- treated and converted into a mix of CO2 and hydrogen, from which the CO2 is separated. The hydrogen is then used as fuel, or burnt to produce electricity.
    Oxy-fuel combustion: The fuel is burned with oxygen instead of air, producing a flue stream of CO2 and water vapour without nitrogen; the CO2 is relatively easily removed from this stream.

ii. Transport options:
Pipelines are the main option for large-scale CO2 transportation, but shipping and road transport are also possibilities.

iii. Storage options:

    Deep saline aquifers (saltwater-bearing rocks unsuitable for human consumption)
    Depleted oil and gas fields (with the potential for Enhanced Oil Recovery)

5. How long has CCS been in existence?

Although there are currently no fully integrated, commercial-scale CCS projects for power plants in operation, many of the technologies that make up CCS have been around for decades:

    CO2 capture is already practised on a small scale, based on technology that has been used in the chemical and refining industries for decades.
    Transportation is also well understood: it has been shipped regionally for over 17 years, while a 5,000km network has been operating in the USA for over 30 years for Enhanced Oil Recovery.
    Small-scale CO2 storage projects have been operating successfully for over a decade, e.g. at Sleipner (Norway), Weyburn (Canada) and In Salah (Algeria). The industry can also build on knowledge obtained through the geological storage of natural gas, which has also been practised for decades.

6. What’s the next step?

CCS technology now needs to be scaled up – including full process integration and optimisation – with demonstration projects of a size large enough to allow subsequent projects to be at commercial scale. This will also build public confidence in CCS as more and more people see that CO2 storage is safe and reliable.

7. Why should we use CCS, given its link to fossil fuels?

Scientists have confirmed that unless we stabilise CO2- equivalent concentrations at their current level of 450 parts per million (ppm), average global temperature is likely to rise by 2.4ºC to 6.4ºC by 2100. If we fail to keep below 2ºC, devastating – and irreversible – climate changes will occur.

This means reducing CO2-equivalent emissions by 50% by 2030. But with world energy demand expected to double by 2030 and renewable energies to make up ~30% of the energy mix by this date, only a portfolio of solutions will achieve this goal. This includes energy efficiency, a vast increase in renewable energy – and CCS.

Around 750 new coal power plants are already planned for the period 2005–2018, totaling more than 350 Gigawatt (GW), of which 50 will be in Europe, almost 300 in China, 200 in India and 50 in the US.

8. Why is it so important to deploy CCS as soon as possible?

Time is of the essence. Any delay in the roll-out of CCS could not only lead to unnecessary CO2 emissions but additional costs, as instead of being able to apply it to the current pipeline of coal plants, a retrofit would be required, increasing the cost of achieving the same emissions reduction. With decisions on the building of new power plants being made now in Europe, it is vital that we are not locked into an infrastructure that is not optimised for CCS.

Indeed, every year that CCS is delayed is a missed opportunity to reduce CO2 emissions. Today, we have ~450 parts per million (ppm) CO2 equivalent in the atmosphere, with concentration rising at over 2 ppm per annum. The Intergovernmental Panel on Climate Change states that if we are to avoid major climate change effects, we must not exceed this 450 ppm. Delaying the implementation of CCS by just 6 years would mean CO2 concentrations increasing by around 10 ppm by 2020.

9. If we are at such a critical phase, why isn’t it already being deployed?

The incremental costs of the first large-scale CCS demonstration projects will be exceptionally high – too high to be fully justifiable to company shareholders.

That’s because all ‘First Movers’ will incur:

    Unrecoverable costs from making accelerated investments in scaling up the technology.
    Market risk due to uncertainty over:
    a) which CCS technologies will prove the most successful
    b) the future CO2 price and
    c) construction and operational costs.

Based on an independent study recently undertaken by McKinsey and Company, it is estimated that the total incremental costs of 10-12 CCS demonstration projects would be €7 billion - €12 billion.

Industry has already declared its willingness to cover both the base costs of the power plant (without CCS) and a major portion of the risks of implementing these CCS demonstration activities. Given that it will bring incalculable benefits to both the public and European industry and that these projects are inherently loss-making, public funding has therefore been provided to support 12 industrial-scale CCS projects. Without this, commercialisation will be severely delayed – until at least 2030 in Europe.

10. Why are public funds needed for CCS demonstration projects?

Currently, a CCS demonstration project would be a loss-making enterprise for industry, given the current price of implementing and using the technology; the current price of carbon; and uncertainty surrounding long-term viability and profitability. No shareholder can therefore be expected to fund it fully at this stage.

The typical cost of a demonstration project is likely to be in the range €60-90 per tonne of CO2 abated. Recent analyst estimates for Phase II of the European Union Emissions Trading Scheme (EU ETS) range from €30 to €48 per tonne of CO2 and, at this stage, similar levels are assumed beyond Phase II (up to 2030). In this range, the carbon price is insufficient for demonstration projects to be “stand-alone”, commercially viable.

Assuming that CCS demonstration projects would cost between €60 and €90 per tonne of CO2, and projecting a median carbon price of €35 per tonne of CO2, there is an “economic gap” of €25-€55 per tonne of CO2 per project. This corresponds to around €500 million - €1.1 billion, expressed as a Net Present Value (NPV) over the lifespan of a 300MW size power plant. The range depends on variations in specific project variables, such as capture technology and capex, transport distance and storage solutions.

11. The UK and the Netherlands are well on their way to implementing CCS demonstration projects – won’t these be enough to make the technology commercially viable?

As it is not yet known which CCS technologies will prove the most successful, it is vital that the full range is tested – including higher-risk technologies – optimised across projects and locations. As each region has its own challenges, local demonstration is also important in order to maximise public and political support.

As importantly, EU CCS demonstration efforts will ensure that cross-border projects – where CO2 is stored in a different country or region to where it is captured – are not excluded. As capture and storage locations are unevenly distributed throughout Europe, cross-border pipelines will play a crucial role in the wide-scale deployment of CCS and the development of clusters in major industrial areas as the next key step.

12. How much will it cost to retrofit CCS technology to existing power plants?

In general, retrofitting an existing power plant would lead to a higher cost for CCS, but these are highly dependent on specific site characteristics, including plant specifications, remaining economic life and overall site layout. For this reason, no generalisation or “reference case” would be meaningful.

There are four main factors likely to drive the cost increase for retrofits:

    The higher capex (capital costs) of the capture facility: the existing plant configuration and space constraints could make adaption to CCS more difficult than for a new build.
    The installation’s shorter lifespan: the power plant is already operating so where (for example) a new plant with CCS may run for 40 years, the capture facility of a 20 year-old plant is likely to have only a 20 year life, reducing the “efficiency” of the initial capex.
    There is a higher efficiency penalty, leading to a higher fuel cost when compared to a fully integrated, newly-built CCS plant.
    There is the “opportunity cost” of lost generating time, because the plant would be taken out of operation for a period to install the capture facility.

13. How can we accelerate the building of CCS projects?

Building a CCS project is a lengthy process: a fully integrated project can take 6.5-10 years before it becomes operational. However, Final Investment Decision can only be made once permits have been awarded across the entire value chain. In the case of CO2 storage, this can take as long as 6.5 years. In such a scenario, even a commercial project started as early as 2016 would not itself become operational until 2024.

Ideally, 10-12 CCS demonstration projects should be operational by 2015. The first early commercial projects should be operational by 2020, with the remaining demonstration projects sufficiently advanced for early commercial projects to be ordered from 2020 onwards. Some 80-120 large- scale CCS projects could therefore be operational in Europe by 2030.

There are several ways we can fast-track the building of CCS projects:

    Starting a commercial project as early as possible during the building of the demonstration project so that – for example – build can start after just one year of the demo being in operation.
    Accelerating feasibility studies etc.
    Making faster investment decisions
    Shortening the tender process
    Introducing special measures to shorten the permitting process.

Some projects, by their very nature, will of course be quicker to build than others, e.g. retrofitting existing power plants with CCS; using well-known oil and gas fields with infrastructure and seismic data already available; those with only a short distance from the power plant to the storage site, etc.

14. How much CO2 can be captured using CCS?

One 900 MW CCS coal-fired power plant can abate around 5 million tonnes of CO2 a year. If, as projected, 80-120 commercial CCS projects are operating in Europe by 2030, they would abate some 400 million tonnes of CO2 per year.

By 2050, CCS could reduce annual CO2 emissions by 0.6 to 1.7 billion tonnes in the EU and by 9 to 16 billion tonnes worldwide. The upper end of this range would require its application to all fossil fuel power plants and to almost all other large industrial emitters – with the large volumes of hydrogen produced used for transport fuel.

15. Isn’t more energy utilised where CCS is implemented?

The absolute efficiency penalty, estimated at around 10% for the reference case (meaning plant efficiency drops from 50% to around 40%), drives an increase in fuel consumption and does require an over- sizing of the plant to ensure the same net electricity output.

However, next-generation technology - such as ultra-supercritical 700°C technology for boilers, coupled with drying in the case of lignite - will achieve a 50% level of overall plant efficiency. While this technology is not currently available, it is expected to be when early commercial CCS projects are built around 2020.

16. Where will CO2 be stored?

The regional distribution and cost of storage in Europe will play an important role in any roll-out of CCS. Most experts agree that depleted oil and gas fields and deep saline aquifers have the largest storage potential.

Depleted oil and gas fields
Depleted oil and gas fields are well understood and around a third of total oil and gas field capacity in Europe is estimated to be economically useable for CO2 storage. With an estimated capacity for 10 to 15 billion tonnes of CO2, this is sufficient for the lifetime of around 50 to 60 CCS projects. However, most of these fields are located offshore in northern Europe and the transportation to and storage of CO2 in these fields (excluding capture) is around twice as costly as onshore fields.

Deep saline aquifers
While much less work has been done to map and define deep saline aquifers, most sources indicate that their capacity should be sufficient for European needs overall. Preliminary conservative estimates by EU GeoCapacity indicate that Europe can store some 136 billion tonnes of CO2 - equivalent to around 70 years of current CO2 emissions from the EU’s power plants and heavy industry. At the higher end of these estimations, EU GeoCapacity estimates some 380 billion tonnes of CO2 could be stored in Europe alone.

17. Storing enormous quantities of CO2 underground must present some risk?

The geological formations that would be used to store CO2 diffuse it, making massive releases extremely unlikely. Indeed, because the CO2 becomes trapped in the tiny pores of rocks, any leakage through the geological layers would be extremely slow, allowing plenty of time for it to be detected and dealt with. In fact, it would not raise local CO2 concentrations much above normal atmospheric levels.

Higher concentration leaks could come from man-made wells, but the oil and gas industry already has decades of experience in monitoring wells and keeping them secure. Storage sites will not, of course, be located in volcanic areas.

18. But won’t CO2 storage increase the likelihood of seismic activity?

A detailed survey takes place to identify any potential leakage pathways before a CO2 storage site is selected. If these are discovered, then the site will not be selected. In areas where some natural seismic activity is already taking place, we can ensure that the pressure on the CO2 does not exceed the strength of the rock by making the volume of CO2 stored relative to that of the storage site. CO2 storage has even proved to be robust in volcanic areas: in 2004, a storage site in Japan endured a 6.8 magnitude earthquake with no damage to its boreholes and no CO2 leakage. But then CO2 has remained undisturbed underground for millions of years – despite thousands of earthquakes.

19. How will we know if the CO2 is leaking?

Before a CO2 storage site is chosen, a detailed survey takes place to identify any potential leakage pathways. If these are found to exist then the site will not be selected. In Europe, underground gas storage (natural gas and hydrogen) has an excellent safety record, with sophisticated monitoring techniques that are easily adaptable to CCS. On the surface, air and soil sampling can be used to detect potential CO2 leakage, whilst changes underground can be monitored by detecting sound (seismic), electromagnetic, gravity or density changes within the geological formations.

The risk of leakage through man-made wells is expected to be minimal because they can easily be monitored and fixed, while CO2 leaking through faults or fractures would be localised and simply withdrawn; and, if necessary, the well closed.

20. Who will be liable for CO2 storage sites over the long-term?

As the CO2 will remain stored underground indefinitely, long-term liability will follow the example set by the petroleum industry, whereby the state assumes liability after a regulated abandonment process. Indeed, EU law governing the safe and permanent storage of CO2 has already been approved and is currently being implemented at national level.

21. Large stationary emitters of CO2 also include refineries, steel and cement plants - how are they linked into what the EC is doing?

The EC encourages the deployment of CCS in other sectors, as 25% of all European CO2 emissions addressable by CCS come from refineries and the cement, iron and steel industries.

 

The European CCS Demonstration Project Network

The EC has established a Network of CCS demonstration projects to generate early benefits from a coordinated European action.
CCS demonstration projects fulfilling minimum qualification criteria are invited to join the Network and benefit from its operations.
The Network allows early-movers to exchange information and experience from large-size industrial demonstration of the use of CCS technologies, to maximise their impact on further R&D and policy making, and optimise costs through shared collective actions.
It is envisaged that, as the Network evolves, its EU-wide, integrating and binding role may be reinforced and complemented by other measures in support of further development of CCS technologies, building towards the establishment of a European Industrial Initiative.

To help fulfil the potential of CO2 Capture and Storage (CCS), the European Commission is sponsoring and coordinating the world’s first network of demonstration projects, all of which are aiming to be operational by 2015. The goal is to create a prominent community of projects united in the goal of achieving commercially viable CCS by 2020.
The CCS Project Network fosters knowledge sharing amongst the demonstration projects and leverage this new body of knowledge to raise public understanding of the potential of CCS. This accelerates learning and ensures that we can assist CCS to safely fulfil its potential, both in the EU and in cooperation with global partners.

CCS Project Network Advisory Forum

To guarantee that the Network is valuable to the wider energy community in Europe, an annual Advisory Forum has been established to review progress and specify the knowledge that can most usefully be generated by the CCS Project Network.

• The first Advisory Forum meeting was held in Brussels on 17 September 2010.
  Read more..
• The second Advisory Forum Meeting was held on 16 June 2011 in Brussels. Read more..

CCS World News

• 2012-07-18 - Carbon capture would create substantial challenges, witnesses say at energy ...
• 2012-07-18 - Opinions Divided on Climate Change and CCS in Saskatchewan
• 2012-07-18 - Planned Tees CCS project could be in line for EU cash
• 2012-07-13 - Yorkshire leads race for €1.5bn EU carbon capture funding
• 2012-07-16 - Codexis releases enzyme CO2 capture results
• 2012-07-16 - U.S. DOE advancing Hydrogen Energy plant in California
• 2012-07-16 - Yorkshire leads race for €1.5bn EU carbon capture funding ...
• 2012-07-15 - UK Don Valley project leads EU funding bid
• 2012-07-15 - Alberta projects get funding boost
• 2012-07-13 - Don Valley leads UK CCS charge for €1.5bn EU funds
• 2012-07-13 - EU says up to 1.5 billion euros ready for low-carbon investment
• 2012-07-12 - Anglo mines to become carbon neutral, CCS-aware by 2030
• 2012-07-12 - Clean coal tech is ready, but theres a catch

Membership of the CCS Project Network is open to all European projects that are at a sufficient scale and level of maturity that will generate valuable output and knowledge about industrial-scale CCS demonstration.
The application process for membership of the Network is designed to be as simple and transparent as practicable, but sufficiently robust to ensure that all members are large-scale demonstration projects at a similar level of maturity.
Project developers may submit applications at any time to demonstrate that they fulfil the eligibility criteria, can provide evidence of the maturity of the project, commit to knowledge sharing and agree to the Network organisation and procedures. The qualification criteria and application process are described in the Qualification Criteria document. The Network is open to all qualifying projects and will not distinguish between EU-funded and non-EU funded projects.

Eligibility Criteria

Projects in the Network shall have sound plans to demonstrate the full CCS value chain by 2015 and shall fulfil the following technical criteria:

• The CCS project shall for a fossil fuel-fired power plant have a minimum gross production of 250MWe before CO2 capture and compression
• The CCS project shall for an industrial plant realise a minimum of 500kt per year of stored CO2
• The CO2 capture rate shall not be less than 85% of the treated flue gas stream
• The project, i.e. the plant to which CCS is applied, shall be located within the European Economic Area (EEA)

Knowledge Sharing

Projects in the Network are committed to knowledge sharing with similar projects and other stakeholders in order to help accelerate CCS deployment and raise public engagement, as described in the Knowledge Sharing Protocol document.

Key documents

European CCS Demonstration Project Network Qualification Criteria
European CCS Demonstration Project Network Knowledge Sharing Protocol

Learn more about CCS

To learn more about CCS, please have a look at the following videos, kindly provided by ZEP:

http://www.ccsnetwork.eu/index.php?p=videos

CROATIAN CENTER of RENEWABLE ENERGY SOURCES (CCRES)
special tanks to

Daniel Rennie
Global CCS Institute
Actualis, Level 2
21 & 23 Boulevard Haussmann
PARIS 75009 France

---

Jose Manuel Hernandez
Programme Manager - EU Policies
European Commission

CROATIAN CENTER of RENEWABLE ENERGY SOURCES (CCRES)

Read more

CCRES Algae Project Q A

 CCRES ALGAE

CCRES Algae Project
Q&A

See answers to common questions about growing algae for biofuel production.

    Algae’s potential
    What makes algae a better alternative fuel feedstock than cellulosic feedstocks, such as switchgrass or miscanthus?
    What transportation fuels can algae produce?
    How much fuel can algae produce?
    Where could this type of algae grow?
    What can you do with material derived from algae production not used for fuel?

    Economics
    How much would a gallon of algae-based transportation fuel cost if it were available at a service station today?
    What can accelerate the commercial availability of algae biofuel?

    Environment
    How will algae-based transportation fuels impact greenhouse gas emissions?
    Is the process capable of being replicated at the local level to increase energy efficiency and promote low-energy overhead?

    Security
    Can algae-based fuels be used in developing countries to help them bypass fossil fuel dependence?

CCRES ALGAE

Q: What makes algae a better alternative fuel feedstock than cellulosic feedstocks, such as switchgrass or miscanthus?

    A: Large-scale production of resource-intensive plants, like switchgrass or miscanthus, requires a substantial amount of fertile land, fresh water, and petroleum-based fertilizer to grow. The fuel derived is ethanol, a lower-energy fuel not compatible with the infrastructure now used to transport, refine, and deliver liquid fuels, like gasoline and diesel.

    Conversely, algae can produce hydrocarbons capable of being converted directly into actual gasoline or diesel fuel, which can be transported and delivered to market using the existing refinery infrastructure.


Q: What transportation fuels can algae produce?
    A: Algae produce a variety of fuel and fuel precursor molecules, including triglycerides and fatty acids that can be converted to biodiesel, as well as lipids and isoprenoids that can be directly converted to actual gasoline and traditional diesel fuel. Algae can also be used to produce hydrogen or biomass, which can then be digested into methane.

Q: How much fuel can algae produce?

    A: The United States consumes 140 billion gallons per year of liquid fuel. Algae can produce 3,000 gallons of liquid fuel per acre in a year, so it would take 45 million acres of algae to provide 100% of our liquid fuel requirements.

    For comparison, in 2008 the United States had 90 million acres of corn and 67 million acres of soybeans in production. So growing 45 million acres of algae, while challenging, is certainly possible.


Q: Where could this type of algae grow?

    A: Algae perform best under consistent warm temperatures between 20 and 30 degrees. Climates with plenty of sunshine offer optimal conditions. Ideal Croatian locations include many of the southern and southwestern areas, such as Dalmatia,(including Dalmatian hinterland ).

CCRES ALGAE

 
Q: What can you do with material derived from algae production not used for fuel?

    A: Production of 140 billion gallons of fuel from algae would also yield about 1 trillion pounds of protein. Since algae-produced protein is very high quality, this protein could be used to feed livestock, chicken, or fish. Presently, all livestock in this country consume about 770 billion pounds of protein per year.


Q: How much would a gallon of algae-based transportation fuel cost if it were available at a service station today?

    A: Today, the cost would be relatively expensive. Additional investment in research is needed to further refine and enhance the algae strains that generate such fuels. Also, more infrastructure needs to be developed to achieve the necessary economies of scale that will come with large-scale commercial production. Once overall efficiency increases, the cost of producing a gallon of gasoline from algae will dramatically reduce.


Q: What can accelerate the commercial availability of algae biofuel?

    A: As viable and potentially transformational as algae-based transportation fuels have already proven, we need a much better knowledge base on algae at the microbial level. We also need to build on this platform to develop the tools and train the next generation of scientists that will help usher in the age of accessible, affordable, and sustainable fuels made from algae. That is a central component of the Croatian Center for Algae Biofuels (CCRES Algae Project).

CCRES ALGAE

Q: How will algae-based transportation fuels impact greenhouse gas emissions?

    A: Production of alternative transportation fuels from algae will help reduce the amount of CO2 in the environment. Algae provide a carbon-neutral fuel because they consume more CO2 than is ultimately released into the atmosphere when algae-based fuel burns. The amount of carbon removed from the environment will depend on the number of algae farms built and the efficiency with which algae can be modified to convert CO2 to fuel products. Eventually, algae farms will likely be located adjacent to CO2 producing facilities, like power plants, resulting in potentially significant CO2 sequestration benefits.


Q: Is the process capable of being replicated at the local level to increase energy efficiency and promote low-energy overhead?

    A: Absolutely. There are huge advantages to locating algae farms near urban centers. The algae consume industrial waste and contaminants, which are usually found in higher concentrations near cities. A perfect location is near a power plant, where the algae can consume flue gas and other waste, or near a wastewater treatment plant where the algae could consume significant amounts of nitrates and phosphates from the waste stream. This could result in cleaner effluent discharge, and perhaps eventually create “new” sources of non-potable water for industrial or agricultural use.


Q: Could algae-based fuels be used in developing countries to help them bypass fossil fuel dependence?

    A: Algae-based fuels (and the protein byproducts derived from their production) definitely have the potential to positively impact developing countries. The requirements for farming algae are fairly straightforward and can be done almost anywhere in the world with an adequate supply of sunshine. In Africa, for example, millions of algae acres could be farmed in its less-populated regions, resulting in a reduced dependence on foreign oil and a reliable and sustainable energy supply.

 

CCRES ALGAE PROJECT

part of 

Croatian Center of Renewable Energy Sources (CCRES)

Read more

CCRES Algae Astaxanthin

CCRES Algae Astaxanthin

Astaxanthins ability to scavenge free radicals in your body* is up to...

    550 times more powerful than vitamin E
    65 times more powerful than vitamin C
    54 times more powerful than beta-carotene
    5 times more powerful than lutein

CCRES ALGAE

It does this by quenching a molecule called singlet oxygen - a harmful reactive oxygen species formed through normal biological processes occurring in your body.* Singlet oxygen possesses a high amount of excess energy that must be released to keep it from damaging other cells.

CCRES Lab

Astaxanthin absorbs this energy and dissipates it as heat, thereby returning the singlet oxygen to a grounded state.*

Theres another way, too, that astaxanthin helps to protect cells, organs and tissues against oxidative damage from free radicals.*

CCRES Algae Astaxanthin

It traps free radicals at both ends of the molecule.* Once captured, the potentially harmful free radicals pass into cellular fluids where they become neutralized by vitamin C. In this way, astaxanthin is sometimes considered a ‘booster for other antioxidants like vitamins A, C and E.*

Whats more, astaxanthin cant act as a potentially detrimental “pro-oxidant” like some of the other carotenoids such as beta-carotene, lycopene, and zeaxanthin.

CCRES CO2

    Support your joint health, flexibility, and mobility*
    Support a healthy immune response*
    Support your central nervous system*
    Support your cardiovascular system*
    Support your brain and eye health due to its unique ability to cross blood-brain and blood-retina barriers*

CCRES ALGAE PROJECT

part of 

Croatian Center of Renewable Energy Sources (CCRES)

Read more

CCRES FUCUS

Fucus vesiculosus, may be an effective alternative treatment for hypothyroidism for some people as it contains iodine found naturally in the sea. Hypothyroidism, also called underactive thyroid, is a condition where the thyroid gland fails to produce enough thyroid hormone. This results in one’s metabolism falling outside of the desired range. There are a wide range of thyroid medications available, both natural and pharmaceutical. As with all medicines, Fucus can occasionally cause side effects, so always consult your healthcare practitioner before starting treatment.

#Hypothyroidism

Hashimoto’s thyroiditis is the most common form of hypothyroidism. It is considered to be an autoimmune disease as the body mistakes the thyroid gland for a foreign body and sends antibodies to attack it which eventually destroy it over time. This leaves the body without essential thyroid hormones that are required for controlling body temperature, appetite and rate of metabolism. If left untreated, hypothyroidism can lead to serious health disorders that could prove fatal.

Symptoms

Symptoms of an underactive thyroid include tiredness, reduced heart rate and pulse, weight gain, dry skin and hair, hair loss, sensitivity to cold, confusion, anxiety, depression, joint pain, headaches, numbness in the extremities and menstrual problems. However, as these symptoms can be attributed to any number of health problems they are often overlooked. If you are experiencing a combination of the aforementioned symptoms without any obvious cause, contact your doctor immediately for a check-up.

#Iodine

According to the University of Maryland Medical Center, those who experience hypothyroidism due to a iodine deficiency may be able to treat their condition with kelp. Iodine, found naturally in kelp, is required to enable the thyroid gland to function correctly. The majority of people in the western world use iodized salt and therefore do not need to supplement with iodine unless they suffer from hypothyroidism.

#Fucus

Fucus is rich in iodine and is available in many different forms including tinctures and standardized extracts. According to the NYU Langone Medical Center, fucus is often referred to as kelp as it is present in a large number of kelp tablets. However, kelp is not considered to be the same as fucus as it is actually a different form of seaweed. The University of Maryland Medical Center recommends a dose of 600mg fucus one to three times per day to stimulate thyroid activity. It is not recommended to self-treat hypothyroidism with fucus.

#CCRES #ALGAE TEAM

Read more

Algae separation technology 3

GFE Global 

offers a customized Oil Extraction Press. 

This unique easy to use Screw Press is designed for extracting oil from any oil seed.
Jatropha
Algae
Rape Seed
Lin Seed
Sesame Seed
Peanut
Ground Nuts
Mustard Seed
Cotton Seed
Jojoba
These presses extract up to 94% oil from feedstock and the extruded meal is perfect for fuel or feed.

CROATIAN CENTER of RENEWABLE ENERGY SOURCES (CCRES)

Read more

CCRES AQUAPONICS CROATIA

 

  

HRVATSKI CENTAR OBNOVLJIVIH IZVORA ENERGIJE

predstavlja Vam 

 Projekt

CCRES AQUAPONICS

Više informacija o Projektu CCRES AQUAPONICS na :

http://ccresaquaponics.yolasite.com/

 All the food CCRES produced during the year is given to poor families.

Za sve dodatne informacije slobodno nas kontaktirajte.

HRVATSKI CENTAR OBNOVLJIVIH IZVORA ENERGIJE (HCOIE)

Read more

CCRES SOURCES OF ALTERNATIVE ENERGY

CROATIAN CENTER of RENEWABLE ENERGY SOURCES 

(CCRES)

 Sources of Alternative Energy

 

Alternative energy or renewable energy is important for creating clean energy future not only for the individual nations but the whole world. It offers excellent alternatives to the fossil fuels to reduce the emissions of carbon dioxide and greenhouse gases. The sources of the alternative energy are inexhaustible and one can rely on them for long-term basis Here are some important sources of alternative energy:

 

1) Solar energy:

The energy obtained from the radiations of the sun is called as solar energy. Sun is the massive source of energy releasing radiations since billions of years non-stop. The radiations emitted by sun are vital for all the plant, animal and human lives on the earth. At present solar energy is being tapped successfully for a number of applications.

Solar cooker is small box type equipment used for cooking of the food without requiring any additional fuel. There are number of variations of solar cooker with different efficiencies and different sizes. Solar water heaters are used extensively for heating water that can be used for bathing, domestic use and industrial purposes. It saves lots of electricity costs and the burning of other fuels like wood, coal, LPG etc. Another very important application of the solar energy is the photovoltaic or PV cells. The PV cells comprise of the solar panels that absorb solar energy and store them in the batteries. The energy from the batteries can be used for different domestic as well industrial applications

Besides these, there are number of other applications of solar energy like solar street lights, solar lanterns, calculators, mobiles etc. Solar energy is available abundantly in countries like India, China, US and others. It is considered to be one of the most resourceful sources of energy for future.

2) Wind energy:

The energy obtained from naturally flowing wind in the atmosphere is called as wind energy. Wind energy is available extensively in specific geographical locations without any costs. The wind in motion carries kinetic energy and it can be converted into mechanical and electrical energy. Presently wind energy is widely used for the generation of electricity.

To tap the energy from wind turbines are used. The wind turbine comprises of large blades looking like the fan. The blades are attached to the hub, which in turn is mounted on a shaft When the moving wind comes in contact with the blades it causes the rotation of the blades, which in turn causes the rotation of the shaft at low speeds. This shaft is connected to the gear box and causes slow rotation of the input gears and fast rotation of output gears and shaft. The output shaft rotates in an alternator that produces electricity. To get sufficient amount of grid power, large number of wind turbines are required at a specific location, which is called as wind farm or wind power plant.

3) Hydropower:

The power obtained from the flow of water is called as hydraulic power or hydro power or water power. The alternative energy from water can be obtained in a number of ways, the most popular being the hydroelectric power plants. In these power plants huge dams are built across the flow of the river. The water is stored in the dam at large heights and it carries potential energy. When the water flows down the potential energy is converted into kinetic energy. The flowing water comes in contacts with the large water turbines and makes them rotate in the transformer that produces electricity. Hydroelectric power plants are important source of electricity in a number of countries including US, China, India, Russia, and others.

Alternative energy obtained from the tides of the oceans is called as tidal energy. The waves in the waters of the oceans can also be utilized to produce electricity.

4) Geothermal Energy:

The heat energy obtained from the deep layers of earth is called as geothermal energy. The heat is produced continuously in the deep layers of earth, which can be utilized for various purposes like heating water, operating the heat pumps, producing electricity etc. Large amount of heat is generated in the core of earth and it gets conducted through the surrounding layers of rock. It comes to the surface of the earth in various forms like lava, hot springs etc, while other heat is stored below the surface of the earth. This heat is the geothermal energy and is available in unlimited quantity.

5) Biomass energy:

Biomass is the organic material obtained from the plants. The plants absorb energy from the sun by the process of photosynthesis so the energy is store in them. The biomass is the garbage leftover by the plants in the form of fallen leaves, broken branches, dead trees, wood chips, wasted crops etc. A number of other garbage and waste materials can be considered to be biomass. The energy obtained from the biomass is called as the biomass energy.

When the biomass is heated, the chemical energy within it is converted into heat energy, which can be used for heating water, producing steam, cooking food etc. Biomass can also be used to produce the methane gas, which can be used as the fuel. Rotten garbage and human waste can also be considered as biomass that can be used to produce methane, which is called as landfill gas or biogas. Biomass can also be converted biodiesel, which can be mixed with the traditional diesel fuel to run the vehicles.

CCRES 

special thanks to   

Escapeartist, Inc

 CROATIAN CENTER of RENEWABLE ENERGY SOURCES 

(CCRES)

Read more

Answer to Fuel Food Crises

 

Aaron Baum at work. All photos courtesy of The Algae Lab

 by Alice C. Chen 

Microscopic spinning orbs and spirals of green goo are the answers to our planets energy crisis and arable land shortage. At least thats what Aaron Baum, a 40-year-old Harvard graduate and Stanford PhD, has concluded.
And Baum should know. After a mid-life crisis of sorts, he spent months researching the types of science that would most benefit the world and concluded that algae are it. Now, he wants to share his passion with the public by creating communities of people with their own algae farms. Imagine that – you can have a personal algae tank that provides fresh, ultra-nutritious food on a year-round basis.
Baum is a research consultant for NASAs OMEGA project, whose mission is to create massive amounts of algae for biofuel, fertilizer and food. The San Rafael, California algae-phile knows not everyone has access to professional grade equipment – which can cost tens of thousands of dollars – so Baum has started teaching seminars on how to raise spirulina inexpensively and in ones own home. The day-long workshops cost $150 and hell also provide you with a kit that includes a tank, spirulina starter stock, a nutrient mix and other equipment for $200. Through these workshops, Baum hopes to continue forming a collaborative community that shares knowledge about algae farming.

The seminars grew out of Baums first venture in algae. In 2008, he created what he says was the worlds first communal algae farm. The project was based in Berkeley and consisted of more than a dozen 55-gallon tanks of algae. It eventually got so massive that it wouldve required full-time staff, so Baum closed it down when he traveled around the world last year to attend algae workshops and visit algae farms. When he returned, he thought it would be more manageable to have the farms in peoples homes. I talked with him about his adventures in algae, and his plans for the future

IMG_2802

Alice Chen: How did you get interested in algae?
Aaron Baum: As a scientist, Im completely committed to doing good things for the environment. I earned my Phd in applied physics from Stanford in 1997 and worked for several years in Silicon Valley as a program manager on technologies I developed in graduate school. I realized I was working my butt off to make computer chips run faster. I kind of lost faith in what I was doing.
I dropped out of that field, worked as an artist for several years and realized I miss science -- the intellectual challenge and making contributions and changing peoples lives. I decided to get back into science on my own terms.
I thought about it for a long time and decided I wanted to work in a field where I could be sure I was doing something good for the world. I started doing a lot of research four years ago and after a few months, algae started to stick up out above everything else. Back then if you searched for algae, what came up was how to kill algae and how bad it was because of algae blooms. That was happening for a while but now its exponentially worse. I started working in that area. Now if you search for algae (online), about half of what you find is good.
AC: Whats so great about algae?
AB: Algae is a way to grow really high quality food in a small area, on the surface of a body of water or in wastewater. Or you can grow algae in dilute urine which is an easy way to get the right nutrients and reduce your impact on the environment.
Most marine biologists consider that the number one danger to marine life is eutrophication, an excess of nutrients in the water from agricultural runoff due to application fertilizer. When it hits the ocean or lake, there are massive algae blooms. When they decay, they wipe out oxygen and everything dies.
If you can find a way to keep nutrients out of water, you reduce the size of dead zones. You can create controlled algae blooms, harvest algae and eliminate nutrients that way. Or you can take wastewater, give it to algae directly and absorb nutrients. You come out with clean water, fuel, food, fertilizer and extra oxygen. And on a small scale in your own house if you grow it in dilute urine, you reduce the fertilizer load on the local ecosystem.

IMG_5964

AC: Tell me about algae as food. Why are people so into it?
AB: The idea was first proposed in the 1930s in Germany. They were trying to develop it for growing food. You can grow a lot of food in a small area. Its extremely nutritious on a gram-for-gram basis. You can mix it in with other food. It didnt take off until spirulina in the 1970s. Now theres chlorella.
Normally you get spirulina in a powder or pill form. Its grown in large outdoor ponds normally, and you sieve it out of water. Its kind of special. It grows in corkscrew filaments making it relatively easy to strain out of water using a special fabric. Most other kinds of algae are too small and roundish, very difficult to filter.
Algae as a food is extremely healthy. Its high in complete protein, antioxidants, omega-3 fatty acids, and its effective against infections. It has defenses against viruses and you can acquire defenses as well. Its good to protect against environmental toxins. There were dozens of experiments where they fed rats a regular diet and another group with spirulina. They exposed them to mercury, lead, pesticides, radiation and mutagens and found that spirulina-eating rats do much better.
In powder form, spirulinas great, but when you want to eat a blueberry, you dont want it powdered. You want it fresh. You can eat fresh spirulina thats basically alive. It tastes better.
AC: What does it taste like?
AB: The problem with most algae is it tastes like seaweed. A lot of people are not turned on by that taste. I think its really good in certain dishes. When you eat it live, fresh, the taste is much lighter, creamy, and buttery. You can spread it on crackers. We mix it with brown rice and guacamole so its vegan. The easiest way is in carrot juice.

IMG_0198

AC: Is anyone else doing what youre doing?
AB: Were at the very beginning of growing it. A few people have worked on it. Some people in France grow spirulina on a small scale in their house. Outside of France, theres been very little work. Im not aware of anyone in the U.S. working on it other than us.
AC: Why havent more people already started growing algae in their homes?
AB: There are technical barriers. You need to grow live spirulina. You need a seed reactor, a nutrient mix to put in the water and a special cloth. You must maintain proper balance between acidity and alkalinity, and the proper temperature. What Im doing is putting together a kit to provide live spirulina.
AC: How is this a communal project?
AB: Im starting out by building the community and showing people how they can do it themselves. Well do it together and share information through our website.
Previously we built a whole algae lab all based on volunteer labor. We built it for about 1,000 times less money than what we spend in places like NASA. What were aiming to do is cultivate algae based on free material. We grow algae and are investigating it as fertilizer, biofuel, and growing it in dilute urine.
Wed like to create an international network of people growing all kinds of algae in their homes in a small community scale, sharing information, doing it all in an open source way. Wed be like the linux of algae – do-it-yourself with low-cost materials and shared information.
I get emails from all over world. Theres been a huge wave of interest in algae, driven by biofuels and by the growing awareness of the lack of farmland. If you want to make new farmland, you have to destroy ecosystems. The biggest impact humans have on the world is through agriculture. If we want to grow more food so people can eat better, we either destroy the last remaining ecosystems on the planet or find a new way to do things.

AC: Whats the market like for spirulina?
AB: The world consumes about 100,000 tons of spirulina a year. Its used for animal feed and its a nutraceutical (that is, a food that provides health benefits). Its kind of expensive, usually about $80 per pound for powder. Its a very nutrient dense food. When I eat spirulina – I eat vegan – I dont have cravings for meat or sugar. Food is more satisfying when it has spirulina. I eat a lot, 15 grams a day. Most people would consider 5 grams a day to be fairly high. If youre eating 10 grams a day, youre spending about $200 a year on it.
AC: How did you transition into algae as a career?
AB: I got interested in algae and decided to create an algae farm project at Burning Man in 2007. I got together a community of people and we created an installation on a trailer. We had 16 bioreactors with live algae that was eating the exhaust of a generator. They grew great – it was very successful. We had a lot of educational material. There were big posters jammed full of text explaining what we were doing and why it was interesting.
Ive worked at the Exploratorium. Theyll tell you that anything beyond one to two sentences, theres no way youre going to get anyone in the public to read anything more than that. On the night of the Burn, the craziest night of all with partying and dancing, I went to the installation. We had forgotten to turn the lights on. In the dark, I was surrounded by people all using headlamps, leaning close and reading every single word wed written. As soon as they knew I was part of it, they started peppering me with questions. A guy from NASA was inspired by this project and then joined the OMEGA project. And then he gave me a call.

LabBench

AC: What are you doing for NASA?
AB: Were developing large-scale systems that are combining biofuel and fertilizer production with wastewater treatment and production of fresh air and fresh water. Were using large membrane enclosures floating in bodies of water. Its a low-energy, low-resource way of growing algae.
One budding thing of NASA technology – were working on a clever way of removing algae from water.
Were focused on the biofuel aspect at NASA. For biofuel, you want a species that produces a lot of oil. Many species of algae can produce huge amounts of oil -- they can be more than 50 percent oil by weight, compared to normal plants that only produce a few percent.
Algae can produce about 100 times more than typical oil plants like soybeans, on a per acre basis. You can grow enough algae to replace all of the fossil fuel in an area thats small enough to be manageable. You dont need to use farmland, theres not much remaining in the world ready to be used, and you dont need fresh water. The nice thing about algae is while they cleans water and air, they can produce very valuable things like fuel, fertilizer and food. Theyre precursers for bioplastics, cosmetics and medicines.
Its a new kind of farming, potentially very low impact and sustainable.

img606

AC: So whats your vision -- to see every household have algae?
AB: I dont see why not. It should be easier than a vegetable plot. Algae is such a super food. Its so productive on a daily basis that with one tank in a window you can significantly supplement the diet of one person. If you use a whole window, you could probably do two to three tanks year round and have even more. Every day you could be eating algae.
Algae is an incredible resource we havent tapped into. Human beings havent gone there yet because its microscopic. I didnt know what algae were until quite a bit later in life. They dont really teach you about it in school. It produces approximately 70 percent of the oxygen we breathe. Its the basis of 95 percent of life thats in oceans.
Even people with no dirt can grow fresh food for themselves. If youre in an apartment complex on the 25th floor, you can still grow fresh food.

 

Croatian Center of Renewable Energy Sources

 special thanks to 

Alice C. Chen 

 

Alice C. Chen developed her storytelling skills while exploring the Amazon Rainforest as an undergraduate at Stanford University. She went on to earn her masters degree from Northwestern Universitys Medill and is now an award-winning journalist.
Alice has nearly a decade of experience across media and has produced stories for the web, print, TV and radio. Her pieces have appeared everywhere from the San Francisco Chronicle to BNET and Newsweek.com. Alices specialties include business and health care reporting, and shes also interested in narrative writing, profiles and inspirational stories.
Previous to Alices freelancing career, she was an education reporter at the Milwaukee Journal Sentinel, one of the largest daily newspapers in the country. Alice resides in the San Francisco Bay Area.

More info about AlgaeLab on

 http://www.algaelab.org/

CCRES SPIRULINA 

project of 

Croatian Center of Renewable Energy Sources

(CCRES)

Read more

CCRES Low Carbon Fuels in Aviation

 photo by CCRES  

Flasks of Algae at the CCRES Lab in Zagreb,Croatia

Biofuels are key to industry’s future

 In a bid to reduce its dependency on imported oil and tackle global warming, the EU has committed to raising the share of fuels from renewable sources in transport to 10% by 2020 – including biofuels, hydrogen and green electricity.

For the growing aviation industry, the switch to plant-based fuel is seen as not only environmentally smart, but a sensible financial move in an era or rising conventional fuel prices and worries about supply security.

Biofuel use in passenger aircraft is still a novelty, and industry officials are urging governments to help lift supplies, much as policies in the EU and United States have created a flourishing market in plant-based oils for motor vehicles.

The industry contends that sustainable fuels will reduce emissions even as passenger traffic grows. The airline sector has committed to meet 10% of its overall fuel consumption with biofuels by 2017 – though the goal is ambitious given that it is to account for just 1% by 2015...

Meanwhile, more doubts are being raised about the environmental benefits of biofuels.

The United Nations Environment Programme has warned that even though burning plant-based fuels can produce significantly lower levels of carbon emissions, production and land clearing to make way for new crops “may reduce carbon-savings or even lead to an increase.”

European conservation groups say the EU and European governments should wait to embrace aviation biofuels until there is proof of their environmental benefits.

 ”Given the right conditions, algae can double its volume overnight. Microalgae are the earth’s most productive plants –– 10 to 15 times more prolific in biomass than the fastest growing land plant exploited for biofuel production. While soy produces some 50 gallons of oil per acre per year; canola, 150 gallons; and palm, 650 gallons, algae can produce up to 15,000 gallons per acre per year. In addition, up to 50 percent (or more) of algae biomass (dry weight) is comprised of oil, whereas oil-palm trees—currently the most efficient large-scale source of feedstock oil to make biofuels—yield approximately 20 percent of their weight in oil,” says Zeljko Serdar, President of CCRES

 Airlines have committed to ramping up their use of biofuels in the belief that they can contribute to achieving the sectors pledges on carbon-neutral growth. For 2050, the EU foresees 40% use of "sustainable low carbon fuels" in aviation.

Croatian Center of Renewable Energy Sources (CCRES)

Read more

The Life of Algae

This video from Sapphire Energy tracks the cultivation of algae from their San Diego lab in microscopic images, to petri dishes, to flasks, and then outside in their Las Cruces, NM facility and into 14?, 40?, 100? and half-acre ponds. This is the path that many thousands of strains have taken as Sapphire refines their library of commercial strains that will be used in their Green Crude Farm or Integrated Algal BioRefinery (IABR) now under construction in Columbus, NM. At the Green Crude Farm, the world’s first commercial demonstration scale algae-to-energy facility, algae will be cultivated in ponds over 2 acres in size.

CCRES SPIRULINA

 part of 

Croatian Center of Renewable Energy Sources (CCRES)

Read more

Nor Cal Biodiesel

CCRES promotes Nor Cal Biodiesel

Nor Cal Biodiesel currently offer two models to choose from: the BioPro190 and the larger BioPro380.

BioPro190

BioPro190 General Information and Specifications Dimensions: 21"w x 21"d x 67"h. Overall height adjustable +/- 2” Weight: 325 Lbs. (empty). Capacity: 50 gallons oil yields 50 gallons of finished fuel.                10 gallons methanol - yields approx. 10 gallons glycerin. Construction: TIG welded 304 stainless steel body; Powder coated carbon steel covers. Fittings: 304 stainless steel or glass filled polypropylene. Electrical: 110 VAC / 15 Amp Circuit. Controls: AUTO mode controlled by program logic controller;                Start button initiates completely automated process;                MANUAL mode controlled by switch actuation. Reaction Method: Acid-catalyzed esterification of free fatty acids                Then base-catalyzed transesterification of triglycerides; Wash Method: Triple-stage turbulent water wash.                1) Mist Spray, 2) Mist & Agitation, 3) Mist & Agitation Batch Time: Reaction Time – approximately 8 hrs;                Initial settling - 16 hrs;                Water wash – approximately 14 hrs;                Drying cycle - Approx 10 hrs: Total Processing Time: Approx. 48 hours start to finish. Items You Will Need To Get Started: 50 Gallons of new or used filtered vegetable oil or oil derived from animal fats 400 micron, or finer, filter to strain the oil 10 Gallons of methanol (racing fuel) For your safety and convenience, we suggest obtaining a methanol compatible and an oil/grease compatible transfer pump 1520 grams (3.41 lbs) Sodium Hydroxide - NaOH or 2350 (5.17 lbs) grams Potassium Hydroxide - KOH 190 mL (6.43 oz) Sulfuric Acid (93% Purity or higher) - Do not use common battery acid 50 Gallons of fresh, standing water 50 Gallon container or receptacle for “water in” 50 Gallon container or receptacle to collect the wash water – or connect directly to a drain. Air tight storage containers for methanol (typically, a 55-gallon drum), catalyst potash, and sulfuric acid Protective gloves, face mask, apron, and safety goggles (included) Transfer hoses, scales, and measuring cups (included) (1) 110-120 volt / 15 amp & (1) 220 volt / 30 amp AC power source

  BioPro380

BioPro380 General Information and Specifications Dimensions: 64"w x 34"d x 91"h. Overall height adjustable +/- 2” Weight: Approximately 675 Lbs. (empty). Capacity: 100 gallons oil yields up to 100 gallons (380 liters) of finished fuel Batch Sizes: - Capable of processing 50, 75, or 100 gallons of oil feedstock (190, 284, or 380 liters). Construction: TIG welded 304 stainless steel body; Powder coated carbon steel covers. Electrical: 220 VAC / 30 AMP & 110 VAC / 15 Amp Circuit. Dedicated Circuits are preferred but not required. Controls: AUTO mode controlled by program logic controller;                Start button initiates the automated process;                MANUAL mode controlled by switch actuation. Reaction Method: Acid-catalyzed esterification of free fatty acids                Then base-catalyzed transesterification of triglycerides; Method: Triple-stage turbulent water wash.                1) Mist Spray, 2) Mist & Agitation, 3) Mist & Agitation Batch Time: Reaction Time – approximately 8 hrs;                Initial settling - 16 hrs;                Water wash –(total three (3) cycles, approximately14 hrs;                Drying cycle - Approx 10 hrs: Total Processing Time: Approx. 48 hours start to finish. Items You Will Need To Get Started: 100 Gallons of new or used filtered vegetable oil or oil derived from animal fats (triglycerides Minimum 400 micron, or finer, filter to strain the oil 20 Gallons of methanol (racing fuel; 99.99% pure) 3040 grams Lye (Sodium Hydroxide - NaOH) or 4700 grams Caustic Potash (Potassium Hydroxide - KOH)* *Recommended 380 mL Sulfuric Acid (93% Purity or higher) - Not common battery acid 100 Gallons of fresh standing water (can also be connected directly to a pressurized water line) 100 Gallon container for water in (or connect to a clean, pressurized water source) 100 Gallon container for water out (or connect directly to a drain) Air tight storage containers for methanol, lye/caustic potash, and sulfuric acid Protective gloves, face mask, apron, and safety goggles (included) Transfer hoses, scales, and measuring cups (included) For your safety and convenience, we suggest obtaining a methanol transfer and oil/grease transfer pump (1) 110-120 volt / 15 amp & (1) 220 volt / 30 amp AC power source

 Since its introduction, the BioPro line of products have steadily found their way into the hands of many an independent souls.

 Click on the links below to read about

  World renowned Dr. Andrew Weil with his BioPro190 

CONTACT Nor Cal Biodiesel

Please feel free to contact  Nor Cal Biodiesel for additional information regarding our products or services.

 

 Nor Cal Biodiesel also welcome any comments or suggestions regarding  products, web site and overall experience regarding your initial interaction with Nor Cal Biodiesel.

General Inquiries and Sales Information info@norcalbio.com
Projects, Business Development or Specific Requests danny@norcalbio.com

Nor Cal Biodiese web site : http://norcalbio.com/index.html

For any additional information, please contact 

Danny Lesa, telephone 707-766-9782 

CROATIAN CENTER of RENEWABLE ENERGY SOURCES
 (CCRES)

Read more

CCRES Microalgae Process Design

CCRES Microalgae Process Design

Join the ranks of hundreds of 
Energy Day organisers across Europe for the 
2015 EU Sustainable Energy Week!

CCRES Microalgae Process Design

The waters of the world house a tremendous variety of microorganisms able to use light as the only source of energy to fuel metabolism. These unicellular organisms, microalgae and cyanobacteria, have the potential to produce energy sources and biofuels, and many other products. To make economical large-scale production of such bulk products possible, the optimal design of bioreactors and cultivation strategies are essential.

Target group

The course is aimed at PhD students, postgraduate and postdoctoral researchers, as well as professionals, that would like to acquire a thorough understanding of microalgal metabolism and photobioreactor design. An MSc level in bioprocess technology, or similar, is recommended.

Course contents

This course provides the essential skills for designing optimal microalgae-based production processes, for both research and commercial purposes.

Through lectures, digital cases and a photobioreactor practical session, the participants will learn:

1) how to describe microalgal metabolism quantitatively;

2) how to apply basic design principles and set up mass/energy balances for photobioreactors;

3) how to cultivate microalgae in fully controlled photobioreactors; and

4) how to integrate all acquired knowledge into optimal production strategies for microalgae biomass or secondary metabolites.

The daily programme is divided into approximately 5.5 hours of lectures and digital cases, and 2.5 hours of practical work. On Saturday and Sunday, 1.5 hours will be spent on practical work (microalgae do not stop growing at the weekends...). Saturday will also feature an excursion to the CCRES research facility, Zadar, Zaton, followed by a barbecue.

The course will be conducted in English and Croatian.

Course coordinators

Mr. Zeljko Serdar, President of CCRES

Mrs. Branka Kalle, President of Council CCRES

The course will be conducted in English and Croatian.

Location & accommodation

Lectures and practicals will be given at Croatian Center of Renewable Energy. Participants have to book their own hotel room.

Contact information

More information concerning the course content can be obtained from Mr. Zeljko Serdar (solarserdar@gmail.com).

For organisational matters please contact Mrs. Aleksandra Maradin, phone: +385-91-5475049.

Registration

To be able to fill in the registration form, you need to create an account, please contact solarserdar@gmail.com

The number of participants to the course is limited.

The final registration date is 9 June 2014.

Applicants will receive a confirmation of their registration within one week and will be informed about their acceptance to the course 1 May 2015 at the latest. When accepted to the course they will receive instructions for further course details.

The course is free for all CCRES members (which includes materials, coffee/tea during breaks, lunches one dinner and one BBQ but does not cover accommodation).

More info : 

http://www.eusew.eu/component/see_eventview/?view=see_eventdetail&index=2&countryID=55&sort=4&pageNum=0&eventid=4478&mapType=europe&keyword=&city=&organiser=&eventDate=&eventType=-1

We look forward to collaborating with you.

Read more